After long-term use of the garment steamer, scale is likely to form inside. If it is not cleaned in time, it will bring a lot of trouble to the performance and use of the machine.
First of all, there are various methods for cleaning scale. One common way is to use white vinegar. First empty the water in the garage steamer water tank, then mix white vinegar and water in the water tank at a ratio of 1:10, then turn on the garment steamer and let it work normally, allowing the white vinegar aqueous solution to circulate inside the machine, with the help of the acidic dissolution of white vinegar Limescale. After the water in the water tank is used up, rinse the water tank and steam generating device repeatedly with clean water until the water flowing out is clear and free of impurities. Another method is to use specialized limescale cleaners, which are highly targeted and can effectively break down scale. Just follow the instructions in the product manual, add an appropriate amount of detergent to the water tank, perform the corresponding heating cycle operation, and then rinse with clean water.
Secondly, if the scale is not cleaned, it will have a significant impact on the performance of the garage steamer. Scale will gradually adhere to the steam generator and the inner wall of the pipe, making the inner diameter of the pipe smaller, hindering the smooth output of steam, resulting in a significant reduction in steam volume. Garment ironing machines that can remove wrinkles quickly will need to iron the same area multiple times due to insufficient steam, seriously reducing ironing efficiency.
Furthermore, not cleaning the scale will also increase energy consumption. Due to the poor thermal conductivity of scale, when it covers the surface of the heating element, it will hinder the transfer of heat, so that the garment steamer needs to consume more electricity to heat the water to the temperature where steam is generated. This not only wastes energy, but also increases usage. cost.
From the perspective of machine life, if scale comes into contact with metal parts for a long time, chemical reactions will occur and corrode key components such as steam generators and pipes. As corrosion intensifies, the strength and sealing properties of components will decrease, making water leakage, air leakage and other failures prone to occur, which will greatly shorten the service life of the garage steamer and may even lead to early scrapping of the machine.
In terms of hygiene, bacteria and microorganisms tend to breed in scale. When the garment steamer is working, these bacteria may be sprayed onto clothes with steam, especially close-fitting clothes, which may cause skin itching, allergies and other problems, endangering human health.
In addition, scale accumulation can also cause safety hazards. Excessive scale may cause the temperature control device of the garage steamer to malfunction, causing the machine to overheat or dry out. This will not only damage the machine, but may also cause serious safety accidents such as fires.
Regular cleaning of the scale on the garment steamer is essential to ensure good performance of the garment steamer, extend service life, ensure safe use and maintain clothing hygiene.
